Free Shipments over 225€ (only EU; bikes & frames excluded) / 30 days returns / Ph: +34 679 399 396 - info@secretspotcyclery.com

Oneup components dropper post remote V3 + cable and housing
Oneup components dropper post remote V3 + cable and housing
Oneup components dropper post remote V3 + cable and housing
Oneup components dropper post remote V3 + cable and housing
Oneup components dropper post remote V3 + cable and housing
Oneup components dropper post remote V3 + cable and housing
  • Afbeelding in Gallery-weergave laden, Oneup components dropper post remote V3 + cable and housing
  • Afbeelding in Gallery-weergave laden, Oneup components dropper post remote V3 + cable and housing
  • Afbeelding in Gallery-weergave laden, Oneup components dropper post remote V3 + cable and housing
  • Afbeelding in Gallery-weergave laden, Oneup components dropper post remote V3 + cable and housing
  • Afbeelding in Gallery-weergave laden, Oneup components dropper post remote V3 + cable and housing
  • Afbeelding in Gallery-weergave laden, Oneup components dropper post remote V3 + cable and housing

Oneup components dropper post remote V3 + cable and housing

Verkoper
OneUp Components
Normale prijs
€54,90
Aanbiedingsprijs
€54,90
Normale prijs
Uitverkocht
Eenheidsprijs
per 
Inclusief belasting Verzendkosten worden berekend bij het afrekenen.

A BETTER REMOTE FOR ANY CABLE OPERATED DROPPER

 

An Aluminum remote with an oversized bearing and a super smooth action. The unique lever position allows you to keep a stronger grip on the bars while actuating your post. Don't think twice about dropping your post, even when charging into technical sections. The OneUp lever mimics your R/H shifter’s inboard upshift paddle position instead of the usual downshift paddle position of most remotes. This position requires considerably less thumb movement to reach the lever.

NO BLEEDING

The cable setup is quick and easy. The cable clamps at the lever making shortening the housing length for clean routing a breeze. Unlike a hydraulically actuated dropper, there is no temperature sensitivity and If your remote gets damaged you can still lower or extend your post by removing it from your frame and pushing on the actuator by hand.

Kit includes cable and housing 

Compatible with all cable actuated dropper posts. 

SPECS

Compatibility

22.2mm Bar Clamp - All other groups
SRAM Matchmaker X - SRAM MMX clamps
Shimano I-spec-EV - 12 speed XTR M9100, XT M8100 and SLX M7100 only
Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only

Weight: 

Remote with 22.2mm Bar Clamp - 46g
Remote with SRAM Matchmaker X - 43g 
Remote with Shimano I-spec-EV - 43g 
Remote with Shimano I-spec II - 41g